Haltech HT045505 Bedienungsanleitung PDF herunterladen (Seite 4)

Harness Overview

The Haltech Nissan RB30 Series Terminated Engine Harness is a plug and play

solution for wiring a Nissan RB30 Series Engine.

Installation is simple and easy as the harness is designed for the engine, all lengths

are correct and all wires are clearly labeled.

Notes on installation:

• Make sure your Engine is grounded directly to the chassis of the vehicle.

A heavy gauge ground / earthing strap should be used to ground your engine to the

chassis of the vehicle. The Haltech Terminated Engine harness does not ground

your engine.

• Keep all wires away from the Exhaust manifold.

• A Haltech Throttle Position Sensor is required to be retro-fitted to the throttle body.

• A Haltech Coolant Temperature Sensor #HT010300 is required to be fitted,

This sensor replaces the OEM sensor.

• Connect the internal ECU MAP sensor via silicon hose or alternatively fit a

Haltech 3Bar MAP sensor to the harness connector labeled MAP.

• Basemaps are available on the website www.haltech.com.au

WARNING!

Damage can occur to your harness and / or ECU if you do not ground

your engine properly. Please ensure heavy gauge cable is used.

1 2 3 4 5 6 7 8 9 ... 15 16

Keine Kommentare

Haltech HT045505 Bedienungsanleitung Seite 4